When you're ready to print, just click this button: Make Print-Friendly
The Water Room
Chlorine
Instructions: Write the correct answer on the line provided. Good luck!
-
What are the two testing devices used to test the Total Chlorine?
-
How long should the Total Chlorine testing strip need to be moving back and forth in the cup of water when taking a manual chlorine sample?
-
What is the difference between the CM130 and the CWP?
-
Total Chlorine test results should be less than or equal to what PPM?
-
The CM130 checks for Total Chlorine after how many minutes?
-
At the sample station, and before checking a sample, how long should you let the water rinse through the valve?
-
You're checking for Total Chlorine, how many milliliters do you fill the cup?
The Water Room (Answer Key)
Chlorine
Instructions: Write the correct answer on the line provided. Good luck!
-
What are the two testing devices used to test the Total Chlorine?CM130 and testing strips
-
How long should the Total Chlorine testing strip need to be moving back and forth in the cup of water when taking a manual chlorine sample?60 seconds
-
What is the difference between the CM130 and the CWP?CM130 checks chlorine and the CWP is the RO
-
Total Chlorine test results should be less than or equal to what PPM?0.1PPM
-
The CM130 checks for Total Chlorine after how many minutes?5 mintues
-
At the sample station, and before checking a sample, how long should you let the water rinse through the valve?At least 30 seconds
-
You're checking for Total Chlorine, how many milliliters do you fill the cup?100ML
When you're ready to print, just click this button: Make Print-Friendly